CHARGING
Charge the upLift5 either by placing the device in the included case and attached the charging cable to the bottom of the case and a USB power source, or by connecting the USB power source directly to the back of the upLift5.
The upLift5’s LED lights will flash once as charging begins, then breathe slowly while charging. The number of LEDs illuminated will correspond with the percentage the device is charged. When charging is complete, the LEDs will automatically turn off. Recommended charging time is once per week.
The device is internally powered by a rechargeable lithium-ion polymer battery pack. The Device is inoperable while charging is occurring.
STORAGE
Proper care should be taken to ensure that the upLift5 is not damaged. The device should be stored in the included case and should be stored at room temperature.
Storage/Operating Temperature: -20°C to 45°C
Storage/Operating Humidity: 15 to 90%
Storage/Operating Atmospheric Conditions: 700 kPa to 1060 kPA
CLEANING
The mouthpiece should be cleaned after each treatment use. Rinse the mouthpiece under water and brush with a toothbrush as necessary. After 3 months of use, the mouthpiece should be replaced. New mouthpieces may be purchased on the upLift5 Amazon company store.
The device is water resistant, NOT waterproof
DO NOT submerge in water
DO NOT use in the shower
Keep USB port clean and dry
Wipe dry before charging after cleaning
The mouthpiece can be detached from the actuator for cleaning and replacement. Turn the mouthpiece one quarter turn counterclockwise and gently pull to detach. To re-attach, line up arrows and turn one quarter turn clockwise.